Fishing Reports & Tips · Southeast

Late Fall Crankbait Fishing on Lake Guntersville

When the water cools off on Guntersville, I reach for a crankbait first. Here's how I'd match depth, bottom and bait to the places bass set up this time of year.

4 min read

Berkley Money Badger

For late fall on Lake Guntersville, I'd start with a crankbait that touches the bottom on the rock points and channel swings where bait schools stack up. Match the bait to the depth the shad are holding, bump the rock, and let the fish tell you what speed they want.

Guntersville is a big Tennessee River impoundment known for largemouth, plenty of aquatic grass, and a lot of hard cover and ledges along the old river channel. As the water cools, bass follow the shad out of the shallows and onto the first structure they hit. That's why a crankbait works so well this time of year: it covers water, it stays in the strike zone, and it feels like a real baitfish running along the bottom.

Why crankbaits fit late fall

Once the water drops into the 50s, bass get less interested in chasing something far across the flat. They still feed hard, though, because they're fattening up for winter. A crankbait that deflects off rock or stumps looks like an easy, panicked meal.

Shad also move shallower and deeper as the days change, so the best crankbait is the one that reaches the depth where you're marking bait. I carry three: one for the shallow rock, one for the middle ground, and one for the deeper channel swings.

Rock points and gravel: the Money Badger

When I want to grind a bait along hard bottom, I tie on the Berkley Money Badger. It's a compact crankbait with a profile that splits the difference between a baitfish and a crawfish, and it comes in five sizes, so you can pick the one that matches the depth you're fishing.

Cast past the point, bring it down until it touches rock, then keep it moving. When it hits something, pause it for a beat and let it float up before you start cranking again. Most of my bites come right after a bump. For color, I like shad patterns on clearer water and a crawfish pattern when the bottom is red clay or rock.

Mid-depth points: the Dime 6

The Berkley Dime 6 is a medium diver, built for roughly six to ten feet, and that's a lot of the points and channel edges you'll fish on Guntersville. It has the balsa-like action Berkley is going for, but it's made from durable plastic, and the FlashDisc helps it track straight.

I'll run it along the edge of the grass where it meets harder bottom, and over mid-depth points where baitfish are staging. A steady retrieve works. Then try a slow stop-and-go when the fish seem lazy. Pick shad colors for bright days and something with a little orange or chartreuse when the water is stained.

Deeper swings: the 6th Sense Crush DD

When the bait moves out onto the channel swings, I go deeper. The 6th Sense Crush DD series is a deep-diving crankbait made to reach depth quickly with less drag, so you spend more of the retrieve in the strike zone.

Make a long cast, crank it down, and make contact with the bottom or any rock you can find. A long cast matters more than anything with a deep diver, because it needs distance to get down. Natural shad colors are my first pick here, because the fish are keying on real forage.

When the grass is in play: the Berkley Jack

Guntersville is a grass lake, and late fall is a good time to work what's left of it. A lipless bait covers the edges quickly, and the Berkley Jack is a tungsten-weighted lipless with a large, flat-sided baitfish profile. The tungsten gives you long casts and a fast sink rate.

Let it sink to the top of the grass, rip it free, then let it fall. Many strikes come right as it comes off the grass. If the fish are suspended above the grass, a straight retrieve works too. Silver and gold flash are good picks in clear to lightly stained water.

Rod, reel and line

Crankbaits are easy to fish wrong with the wrong setup, so here's what I'd use:

  • Rod: a medium-power to medium-heavy crankbait rod with a moderate or parabolic tip, around seven feet, so the rod loads and the hooks stay pinned on a fish.
  • Reel: a reel with a slower gear ratio for the deep divers, and a moderate ratio for the Dime 6 and the Money Badger.
  • Line: fluorocarbon in the 10 to 14 pound range. Go lighter for shallow baits and heavier for the deep diver or when you're fishing around stumps.
  • Lipless baits: a stiffer rod and a bit of stretch in your line help when you're ripping free of grass.

Putting it together

Start with the point or channel swing that has bait on it, and begin with the crankbait that matches the depth. If you can't get bit, change depth before you change color. If you're getting followed but not bitten, slow down, add a pause, or drop down a size.

You can see everything we carry in our crankbaits collection, and if the fish want something with a different look, check out the jerkbaits too. For a similar approach on a different lake, I wrote about late-fall moving baits for Fort Loudoun Lake bass.

Before you head out, check with the Alabama Department of Conservation and Natural Resources for current regulations and any lake-specific rules. I don't quote limits or seasons here, because they change and you should always go to the source.

Gear from this post

We ship anywhere in the US, and you can pick up your order at the shop in Maryville, TN (5221 US Highway 411 S). Questions about any of this gear? Stop by or get in touch.

Matt McKee owns McKee Outdoors in Maryville, Tennessee. More about Matt and the shop.